Industrial Waste Removal

Guide · Facilities managers · 3 min read · Updated 16 November 2026

Factory and Warehouse Clearance: A Planning Checklist

Short answer

Plan a factory or warehouse clearance by listing everything that must go, identifying hazardous items and machinery, and arranging a survey. Agree a fixed price, timescale and sequence of work, then prepare the site by isolating services to equipment, removing personal items and checking access. Keep every waste transfer and consignment note, and confirm the building meets the lease's handback conditions.

A factory building

Start with an inventory

A clearance goes smoothly when everyone knows exactly what is leaving. Walk the site room by room and list the main categories: production machinery, racking, mezzanine contents, office furniture, IT equipment, stock, packaging, chemicals and general waste. Mark what is being kept, what is being sold or moved to another site, and what is going for recycling or disposal. Pay particular attention to forgotten areas such as mezzanines, roof voids, external stores, compressor rooms and yard containers. These often hold old chemicals, drums and scrap that nobody has looked at for years. Photograph each area before work begins. The photos help with the survey, provide a record of the condition of the building and make it easier to confirm later that everything on the list was dealt with.

  • Production machinery and plant
  • Pallet racking, shelving and mezzanine contents
  • Stock, raw materials and packaging
  • Chemicals, oils, paints, batteries and fluorescent tubes
  • Office furniture, IT and electrical equipment
  • External stores, containers and yard waste

Identify hazardous items early

Hazardous waste needs its own route, packaging and consignment notes, and it can take longest to arrange. Identify drums, IBCs, chemical stores, oily waste, batteries and fluorescent tubes early, and gather the safety data sheets for any products. Unlabelled containers may need sampling before they can be collected. In older buildings, consider asbestos. Under the Control of Asbestos Regulations 2012, those responsible for non-domestic premises must manage asbestos, and a refurbishment and demolition survey may be needed before any work that disturbs the building fabric, such as removing fixed plant or stripping out partitions. Gas cylinders, fire extinguishers and refrigeration equipment also need separate handling. Cylinders usually go back to the supplier who owns them, and refrigeration units containing refrigerant gases must be dealt with by suitably qualified technicians.

The survey and quote

Clearances are priced after a survey because the variables are large. The surveyor looks at the floor area, volume, racking, machinery, hazardous items, access, loading bays, forklift availability, headroom and working hours. They will also ask about deadlines, such as a lease end date. Warehouse and factory clearances start from £1,500, with the fixed price reflecting the actual site. Ask for a method statement and risk assessment covering how heavy items will be moved, how hazardous materials will be handled and how the work is sequenced. Ask how the contractor will deal with any items that turn out to be different from what was surveyed, such as extra drums found behind racking, and how those will be priced. Clear terms at the start prevent disputes later.

Survey itemWhy it affects the job
Floor area and volumeSets crew size, vehicles and days on site
Racking and mezzaninesDismantling needs time, equipment and safe systems of work
MachineryMay need isolation, draining, cutting or lifting
Hazardous itemsNeed specialist packaging and consignment notes
Access and loadingBays, forklifts and headroom change how fast loading goes

Sequencing the work

A typical clearance runs in stages. Hazardous waste is usually removed first, so it cannot be damaged or mixed in. Saleable items and assets going elsewhere follow. Then general stock, packaging and office contents are cleared, followed by racking, mezzanine contents and machinery. Metals are segregated throughout because they have value. The last stage is a sweep and clean of the floor, leaving the building ready for inspection. Agree who isolates electrical, gas, compressed air and water supplies to machinery. Fixed electrical work should be done by a competent electrician. Keep the site secure throughout. Empty or partly cleared buildings attract theft, particularly of metals and cabling, so agree who holds the keys, when the alarm is set and how materials awaiting collection are stored.

Paperwork and handback

Keep a file for the clearance. It should include every waste transfer note for non-hazardous waste, kept for at least two years, and every hazardous waste consignment note, kept for three years in England and Wales. Add records of any data-bearing equipment destroyed, scrap metal receipts and any asset sales. Before handing the building back, check the lease. Many leases require the premises to be returned clear, clean and in a set condition, sometimes with tenant fit-out removed. Photograph the empty building and keep the photos with the clearance file. Return keys, fobs and access cards in an agreed handover, and note meter readings on the final day.

Reducing cost and waste

The waste hierarchy applies to clearances. Selling or reusing racking, machinery and stock reduces disposal costs and often brings in money. Returning pallets and packaging to suppliers, recycling metals, cardboard and plastics, and segregating wood all cut the volume of mixed waste. Starting the clearance early, rather than in the final week of a lease, gives time to find buyers and to separate materials properly, which is almost always cheaper than a rushed clearance where everything goes as mixed waste. Tell staff, neighbours and other tenants on a shared estate about the clearance dates, particularly if large vehicles will be using shared roads or loading areas.

Questions people also ask

How long does a factory clearance take?

It depends on the size of the site, the volume of material, racking and machinery, and how much hazardous waste is involved. A small unit may be cleared in a day or two; a large factory can take several weeks. The survey will give a realistic timescale.

Can you clear racking and mezzanine floors?

Yes. Pallet racking and mezzanine contents are dismantled using safe systems of work and suitable access equipment, and the steel is segregated for resale or recycling. Mezzanine structures themselves may need structural assessment before removal, depending on how they are fixed.

What happens to stock left in a warehouse?

Saleable stock can often be sold or donated, which reduces costs. Damaged, obsolete or contaminated stock is segregated by material and sent for recycling or disposal. Some products, such as chemicals or electrical goods, need specific routes under hazardous waste or WEEE rules.

Written and checked by the Industrial Waste Removal team. Read our editorial policy.

Get a free industrial waste removal quote

Tell us what you need and we'll come back with a clear price.

Request a quote