Industrial Waste Removal

Guide · Businesses · 3 min read · Updated 16 November 2026

Waste Oil and Coolant Disposal for Workshops and Factories

Short answer

Waste oils, cutting fluids and coolants from workshops and factories are usually hazardous waste. Store them in sound, labelled containers with secondary containment, keep different types separate, and use a registered carrier with consignment notes. Never pour them into drains. Typical guide prices are £60–£150 for a 205-litre drum and from £150 for an IBC of liquid waste.

Inside a large industrial factory

Common liquid wastes on industrial sites

Machining, maintenance and vehicle workshops produce a range of oily and liquid wastes: used engine and hydraulic oils, gearbox oils, soluble cutting fluids and coolants, oily water from separators and wash bays, and contaminated fuel. Most of these are classed as hazardous waste because they contain mineral oils and other substances harmful to people and the environment.

Oil is a major cause of water pollution. A small amount can contaminate a large volume of water, which is why the law on storing and disposing of oil is strict.

Storing waste oils safely

In England, the Control of Pollution (Oil Storage) Regulations require oil stored above certain quantities to be kept in suitable containers with secondary containment, such as a bund, that can hold a set proportion of the stored volume. Wales, Scotland and Northern Ireland have their own oil storage rules. Even where the rules do not strictly apply, the same approach is good practice.

  • Use sound, compatible containers with secure lids: drums, IBCs or purpose-made tanks.
  • Label each container clearly with its contents.
  • Keep containers on bunded pallets or inside a bunded area.
  • Keep different wastes separate, as mixing can make them harder and costlier to treat.
  • Store away from drains, and know where your surface water drains go.
  • Keep spill kits close to storage areas and train staff to use them.

Never mix and never drain

Mixing hazardous wastes, or mixing hazardous with non-hazardous waste, is generally not allowed without an appropriate permit, and it makes treatment harder. Keep engine oil, cutting fluids, solvents and fuels apart. Never pour any of them down sinks, drains or onto land. Surface water drains often lead straight to rivers and streams, and foul drains are not designed for oils and coolants.

Discharging trade effluent to the public sewer requires consent from the water company. Coolant and oily water should go to a licensed waste route unless you have a specific consent.

WasteUsually hazardous?Typical container
Used engine and hydraulic oilYes205-litre drum or tank
Soluble cutting fluid and coolantYes, usuallyIBC or drums
Oily water from interceptorsOftenTanker collection
Contaminated fuelYesDrums or tanker
Oily rags and absorbentsYes if contaminatedLidded bins or drums

Paperwork for hazardous liquid waste

Each movement of hazardous waste in England and Wales needs a consignment note, completed before the waste leaves the site, with copies kept for at least three years. The note records the waste description and code, quantities, the carrier and the receiving site. Scotland and Northern Ireland have their own consignment systems.

Use a registered waste carrier that can take the waste to a site permitted to accept it. Ask for the carrier's registration and the receiving site's details, and check them.

Spills and emergencies

Despite good storage, spills happen. Stop the source if it is safe, contain the spill with absorbents or booms, and protect nearby drains with covers or mats. Collect contaminated absorbents as hazardous waste. If oil reaches a drain or watercourse, report it to the relevant environment agency's incident hotline straight away.

A written spill plan, with a site drainage map and named people responsible, makes a real difference in an emergency.

Training and responsibilities

Good storage and paperwork only work if people on the shop floor know what to do. Train staff on which container each waste goes in, how to label containers, how to check bunds and what to do in a spill. Include agency staff and contractors who work on site. Short toolbox talks every few months keep the message fresh.

Name a person responsible for waste on site, usually a maintenance, facilities or environmental manager. They should check storage areas regularly, book collections before containers are full, keep the consignment notes in order and be the contact for the waste contractor and for any inspection.

Record checks in a simple log: date, condition of containers and bunds, any spills and actions taken. These records show regulators and customers that waste is being managed properly, and they help spot problems such as leaking containers before they turn into pollution incidents.

Reducing liquid waste

Coolant management, such as regular concentration checks, filtration and removal of tramp oil, can extend the life of cutting fluids considerably. Good maintenance of hydraulic systems reduces leaks. Some used oils can be sent for re-refining or recovery, which may lower disposal costs. Ask your waste contractor what recovery options exist for your wastes.

Costs

Guide prices start at around £60–£150 for a 205-litre drum of waste oil or coolant and from £150 for an IBC of liquid waste, depending on the waste, volumes and location. Regular scheduled collections are usually cheaper per container than one-off visits. Interceptor and tanker services are quoted separately.

Questions people also ask

Is waste coolant hazardous waste?

Most used soluble cutting fluids and coolants are classed as hazardous waste because of the oils and additives they contain. Check the safety data sheet and your waste assessment, and handle them accordingly.

Can I mix waste oil and coolant in one drum?

It is best not to. Mixing different hazardous wastes is generally restricted, and it makes treatment and recovery harder. Keep separate, labelled containers for each type.

How long must I keep hazardous waste consignment notes?

In England and Wales, producers must keep hazardous waste consignment notes for at least three years. Other parts of the UK have similar requirements.

Written and checked by the Industrial Waste Removal team. Read our editorial policy.

Get a free industrial waste removal quote

Tell us what you need and we'll come back with a clear price.

Request a quote