Guide · Businesses · 4 min read · Updated 16 November 2026
How Much Does Industrial Waste Removal Cost in the UK?
Short answer
In the UK, a van load of mixed industrial waste typically costs £180–£350 to remove. A 20 to 40 yard roll-on roll-off container costs £350–£900, a 205 litre drum of waste oil or coolant £60–£150, and an IBC of liquid waste from £150. Machinery removal starts from £300 and a warehouse or factory clearance from £1,500, priced after a survey.
Industrial waste prices at a glance
Industrial waste covers everything from clean cardboard and pallets to waste oils, solvents and redundant machinery, so pricing is built around what the waste is rather than a single rate. The guide prices below reflect typical 2026 costs for collection, transport and lawful treatment, with the correct paperwork. Larger and more complex jobs are quoted after a survey, and every job is confirmed as one fixed price. Two loads of the same size can cost very different amounts. A load of segregated steel offcuts may cost little or even earn a rebate. A load of mixed waste with contaminated packaging and a few drums of unidentified liquid costs considerably more, because each part needs its own route.
| Job | Guide price | Notes |
|---|---|---|
| Van load of mixed industrial waste | £180–£350 | Two operatives loading, segregation where practical |
| Roll-on roll-off container, 20–40 yard | £350–£900 | Delivery, collection and disposal; depends on material and weight |
| Waste oil or coolant drum, 205 litre | £60–£150 | With consignment note; depends on contamination |
| IBC of liquid waste | from £150 | Depends on contents; safety data sheets help |
| Machinery removal | from £300 | Scrap or resale value may reduce the cost |
| Warehouse or factory clearance | from £1,500 | Priced after survey |
What drives industrial waste costs
The biggest factor is the type of waste and how it must be treated. Inert and recyclable materials are cheapest to process. General mixed waste carries gate fees and, where it goes to landfill, landfill tax, which is charged by weight. Hazardous waste costs more again because of specialist treatment, packaging and the consignment paperwork that goes with it. Weight matters as much as volume. Dense materials such as rubble, metal swarf and sludges reach vehicle weight limits long before a container looks full, so they are priced by weight. Location and access also play a part. Sites with a clear loading bay and a forklift available are quick to load. Upper floors, narrow yards, height barriers and restricted delivery windows slow everything down and may need smaller vehicles or extra crew.
- Waste type and the treatment route it needs
- How well waste is segregated at source
- Weight as well as volume, especially for dense materials
- Packaging needed for hazardous liquids and solids
- Access, loading equipment, out-of-hours working and deadlines
How segregation cuts costs
Mixed waste is expensive because someone has to sort it, or it goes to a more costly treatment route. Separating materials at source, with labelled containers for cardboard, plastics, metals, wood and general waste, usually lowers the overall bill. Clean metals and some plastics and cardboard can have value, which offsets collection costs or produces a rebate. Segregation is also increasingly a legal requirement. Simpler Recycling in England, the Workplace Recycling regulations in Wales and the Waste (Scotland) Regulations 2012 all require businesses to separate key recyclable materials from residual waste.
Hazardous waste pricing
Hazardous waste is priced by type, hazard, quantity and packaging. A drum of clean waste mineral oil is straightforward. A drum of mixed solvents, unlabelled containers or contaminated sludges costs more, because the contents may need sampling and specialist treatment. Safety data sheets for the original products help identify the waste correctly and keep costs down. Never mix different hazardous wastes to save containers. Mixing is generally prohibited under the hazardous waste rules without a permit, it can create dangerous reactions and it makes the waste far more expensive to treat. Properly labelled, sealed and compatible containers also make collection quicker and cheaper, because the waste can be loaded straight onto the vehicle without repackaging on site.
Machinery and clearances
Redundant machinery is priced on its size, weight, location and what is needed to remove it safely: electrical and fluid isolation, draining oils and coolants, dismantling, cutting and lifting. Many machines contain valuable steel, copper and other metals, and some have resale value, which can reduce the cost considerably. Warehouse and factory clearances start from £1,500 and are always surveyed first. The survey covers floor area, racking, mezzanine contents, stock, hazardous items, access and the timescale, so the fixed price reflects the actual job. Ask whether scrap value has been deducted in the quote, and how it was calculated, so you can compare offers on a like-for-like basis.
One-off jobs versus regular collections
Many industrial sites need both. One-off collections deal with clear-outs, machinery replacements and backlogs of waste that have built up in a yard. Regular collections handle the steady output of a production site: general waste, recyclables, metals and routine hazardous waste such as oily rags and waste oil. Regular services are usually cheaper per collection because containers and routes are planned in advance, and a season ticket transfer note can cover repeated identical non-hazardous collections for up to a year. If you are paying for frequent one-off collections, it is worth asking whether a scheduled service would cost less and keep your site tidier.
Getting an accurate quote
Give as much detail as you can: what the waste is, approximate quantities, how it is stored, and photos. For liquids and chemicals, include product names and safety data sheets. For machinery, give make, model, weight if known and how it is fixed down. Mention access, such as loading bays, forklift availability, height restrictions and working hours. With that information, simple collections can be priced quickly, and larger jobs can be surveyed efficiently.
Questions people also ask
Why is hazardous waste more expensive to remove?
Hazardous waste needs specialist packaging, transport, treatment and consignment paperwork, and treatment routes such as solvent recovery, oil re-refining or high-temperature incineration cost more than general disposal. Price depends on the type of hazard, the quantity and how well the waste is identified and contained.
Can scrap metal reduce my waste removal costs?
Yes. Clean, segregated metals such as steel, stainless, aluminium, copper and brass have value and can offset collection costs or earn a rebate. Under the Scrap Metal Dealers Act 2013, payment for scrap metal cannot be made in cash in England and Wales.
Do you charge more for out-of-hours collections?
Evening, night and weekend work may cost more because of crew scheduling. Many industrial sites prefer removals outside production hours to keep loading bays and forklift routes clear of vehicles and operatives. Tell us your preferred times and any site rules when requesting a quote.
Written and checked by the Industrial Waste Removal team. Read our editorial policy.
More guides
Hazardous Waste Consignment Notes: A Guide for Businesses
In England and Wales, the Hazardous Waste Regulations 2005 require hazardous waste to be moved with a consignment note that records the waste, its…
Business Waste Duty of Care: What Industrial Sites Must Do
Under section 34 of the Environmental Protection Act 1990, every business must store waste safely, describe it accurately, hand it only to authorised…
Factory and Warehouse Clearance: A Planning Checklist
Plan a factory or warehouse clearance by listing everything that must go, identifying hazardous items and machinery, and arranging a survey. Agree a…
Industrial Machinery Removal: Decommissioning and Disposal
Removing industrial machinery involves isolating power, compressed air and other services, draining oils and coolants, dismantling or cutting where…
EWC Codes Explained: How to Describe Industrial Waste Correctly
EWC codes, also called List of Waste codes, are six-digit codes used on waste transfer notes and consignment notes to describe waste. The first two…
Waste Oil and Coolant Disposal for Workshops and Factories
Waste oils, cutting fluids and coolants from workshops and factories are usually hazardous waste. Store them in sound, labelled containers with…
Get a free industrial waste removal quote
Tell us what you need and we'll come back with a clear price.
Request a quote